Hydraulic Well Drilling Rig
Delivery term:The date of payment from buyers deliver within days- Price:
Negotiable
- minimum:
- Total supply:
- Delivery term:
The date of payment from buyers deliver within days
- seat:
Shandong
- Validity to:
Long-term effective
- Last update:
2020-07-17 08:50
- Browse the number:
219
- Shandong Binzhou Forging and Pressing Machinery Factory By certification [File Integrity]
-
Contact:
sdbzdyjx(Mr.)
- Email:
- Telephone:
- Phone:
-
Area:
Shandong
-
Address:
No.534, 4th Huanghe road,Binzhou, China
- Website: http://www.cndrillingrig.net/ http://sdbzdyjx.potraitpools.com/
Product details
Product introduction:
BZCY600BZY hydraulic well drilling rig is direct rotary drilling rig. The truck chassis uses SINOTRUK brand 8×4 special chassis, 11.00R20 steel off-road tire tread, with good off-road performance.
Product parameters:
Technical parameter | |||
Drilling depth(M) |
600 |
||
Drilling diameter(mm) |
500 |
||
Inner diameter of the rotary table(mm) |
500 |
||
Speed of turntable(r/min) |
117;102;60;38;23;13;16(reverse) |
||
Torque of turntable(KN.m) |
5.4---34(reverse) |
||
Single rope lifting capacity of main windlass(KN) |
50 |
||
The capacity of main windlass(KN) |
300 |
||
Single rope lifting capacity of tool windlass(KN) |
20 |
||
The rope capacity of tool windlass(m) |
40 |
||
The lifting capacity of hook(KN) |
320 |
||
Bearing capacity of mast (KN) |
360 |
||
The effective height of mast (mm) |
11800 |
||
The height of mast (mm) |
12468 |
||
Bearing capacity (t) |
36 |
||
Pipe |
Kelly (mm) |
108×108×7500 |
|
Assistant pipe (mm) |
Ф89×10×6000 |
||
Hydraulic pump |
Model |
CBQL-F550/F532-CFHL |
|
Pump delivery (ml/r) |
50/32 |
||
Rated speed (r/min) |
2000 |
||
Rated pressure(MPa) |
20 |
||
3NB-130 |
Diameter of cylinder (mm) |
100 110 120 130 140 |
|
Stroke of piston (mm) |
160 |
||
Theory of flow (L / min) |
1000 |
||
Rated pressure (Mpa) |
5 |
||
Pounding times (min-1) |
135 |
||
Diameter of suction tube (mm) |
152 |
||
Diameter of drain pipe (mm) |
65 |
||
Input speed (r / min) |
565 |
||
Input power (kw) |
95 |
||
Overall dimensions (mm) |
2160*1400*1300 |
||
Weight (t) |
3.9 |
||
Truck chassis |
Model |
TAZ5204TYT |
|
Drive form |
8×4 |
||
Engine |
Model |
SINOTRUK D10.27-40diesel engine |
|
Rated power(KW) |
196 |
||
Speed (r/min) |
2200 |
||
Size (L*W*H)(mm) |
11510×2480×2800 |
||
Drilling rig engine |
Type |
CUMMINS 6BTA5.9-C180 diesel engine |
|
Power(kw) |
132 |
||
Speed(r/min) |
2200 |
||
Electric generator |
Model |
MF |
|
Rated power (kw) |
30 |
||
Rated voltage(v) |
380 |
||
Rated current(A) |
27 |
||
Speed (r/min) |
1480 |
||
Frequency(Hz) |
50 |
||
Protection level |
IP21 |
||
Insulation Class |
H |
||
The best working gear (or speed) |
5th gear(1000-1400r/min) |
||
The highest speed(Km/h) |
70 |
||
Weight (kg) |
21650 |
||
Transport size(L*W*H)(mm) |
12720×2490×4210 |
||
Working size(L*W*H)(mm) |
11830×5370× |
The rig should be checked at any time
1. Check the consolidation of the wire rope end;
The contents of the wire rope inspection are: the number of safety rings of the wire rope, the selection, installation and lubrication of the wire rope, the defect inspection of the wire rope, such as the diameter and wear of the wire rope, the number of broken wires of the wire rope, etc.;
2. Check the pulley system of the drilling machine at any time. The main inspection items are: the condition of the pulley body and the anti-jumping device of the transition pulley;
3. Check the walking system of the drilling rig at any time. The main inspection items are: the condition of the pile machine, the card board and the hook pipe system, and the laying of the sleeper;
Third, do a good job of rig maintenance and repair records, the replacement parts should have a detailed record to ensure that the spare parts are used within the validity period, or keep abreast of the time of the next replacement;
4. If the rig is faulty, stop the operation immediately and do not use it until the fault is not eliminated.
Operating procedures:
1. Under no circumstances should the person in the upper section of the mast be allowed to stay under the mast.
2. In case of bad weather (rainstorm, heavy snow, icing or winds of level 5 or above), work on the mast is not allowed. At the same time, artificial lighting is not allowed to work on the mast.
3. It is strictly forbidden to use the stranded wire rope.
4. When the drill is raised and lowered, it is strictly forbidden to touch the wire rope by hand.
5. Except for the rig lifting and lowering, the drill pipe is strictly prohibited.
6. In order to prevent the drilling tool or the pump from pulling out of the well, it must be hooked with a hook made of a steel rod with a diameter of 15 to 20 mm.
7. When cleaning the pump, it should be looped with a strong and reliable wire rope, and placed at the lower end of the pump to turn it upside down.
8. All workers should leave the well when lifting or lowering the casing with a pulley and when the machine is working.
9. When the sleeve is pulled out with the jack, in order to avoid the sleeve falling off, it must be fixed to each other.
10. When the lighting is stopped (at night), the drilling work should be stopped.
11. it can automatically adjust the drilling speed for different geological conditions.
The drilling process can be achieved in pressruized drilling technology, adjust different pressure for different geological conditions, and can be viewed drilling pressure by pressure gauge. At the same time, it can adjust the drilling speed.
The drilling rig can achieved fast drilling by manually, especially for soil. It can achieved different speed for different soil.
It has a large lifting force hydraulic main hoist, stepless lift, and to achieve release rope quickly. When upgrading heavy, the lifting speed need slow to aviod crash the turntable and wellhead board. When put down single drill pipe, operate the quick handle, it can achieved release rope quickly like mechanical hoist.
It has a hydraulic tool hoist, the tool hoist has large lifting force and quick lifting speed, it is both easy to loading drill tools, drill pipe and drill accessories transport, and can slide up and down with anchors, its very convenient to load and unload the drill pipe.
It has a hydraulic cylinder control double card board forward and backward, it makes the insurance card board closed, to achieve stuck or release the pipe joints.
It use integrated design of pneumatic, to achieve the 3NB-130 mud pump clutch using pneumatic remote control, it has high degree of automation and easy-saving operation.
It is installed 4 hydraulic legs and 2 mechanical legs, every hydraulic leg rod with locknut。After leveling the rig, it can lock the cylinder use locknut. So, even if the cylinder leaks, the chassis is not instability.
The turntable use stir bars, internal turntable use spiral arc gear to transmission, it has large torque, it about 2 times of similar products at domestic and foreign.
It is installed a generator (30kw) , so that it is convenient to illuminate or work at night.
The hydraulic system use open system, the chassis and drilling rig are separately manipulated, it can avoid misuse. Winter oil heater and summer oil radiator are installed, to adapt to different seasons hydraulic oil for heating and cooling.
This drilling rig equipped with an auxiliary unloading cylinder, it can be used to promote the turntable ratchet, to achieve auxiliary unloading the drill pipe.
__
http://www.cndrillingrig.net/
-
X-20cc-R Pro Gasoline Engine
price: Negotiable
-
Party Tent
price: Negotiable
-
Piston and Rod Wear Rings
price: Negotiable
-
PE Fishing Rope
price: Negotiable
-
Paper Cup with Handle Machine
price: Negotiable
-
FKM Rubber Sheet
price: Negotiable